A correlation based on pressuremeter, SPT and CPT tests for characterizing of coastal alluvium: A study for phase 14 South Pars, Iran

Abstract

Pressuremeter Test (PMT), Cone Penetration Test (CPT), and Standard Penetration Test (SPT) are the key in-situ experiments to directly estimate the in-situ modulus of deformation and strength parameters of soils, which are highly used in coastal alluvium. In addition, CPT and SPT are unique tests for estimating engineering properties that are ideal for onshore regions. These tests are adaptable for coastal alluvium with different saturation levels, which facilitates the determination of the field deformation modulus. Regression analysis, on the other hand, is primarily employed to estimate the empirical relationship between measured parameters and to predict geo-engineering properties. This technique is typically used to estimate the in-situ modulus of deformation and strength parameters from CPT, SPT, and PMT results. The proposed formulas in this paper used regression to correlate and characterize coastal alluvium located in phase 14 South Pars (Assalouyeh) and were compared with previously published equations. As a result of the evaluations, the correlations provided for phase 14 South Pars can be expressed as Em = 0.442 qc + 2.221 (R2 = 0.999) and PL = 0.06 Em0.778 (R2 = 0.515). • This empirical method can be useful for ground assessment and estimating the in-situ modulus of deformation. • This relationship can use as a modification for the original formula used based on CPT-PMT-SPT for alluvium. • This empirical correlation provides fast and reliable data for Southwest Iran nearby the Persian Gulf.